TY - JOUR
T1 - Naphthalene flanked diketopyrrolopyrrole
T2 - A new conjugated building block with hexyl or octyl alkyl side chains for electropolymerization studies and its biosensor applications
AU - Ponnappa, Supreetha Paleyanda
AU - Liu, Qian
AU - Umer, Muhammad
AU - MacLeod, Jennifer
AU - Jickson, Jospeh
AU - Ayoko, Godwin
AU - Shiddiky, Muhammad J.A.
AU - O'Mullane, Anthony P.
AU - Sonar, Prashant
N1 - Funding Information:
Supreetha is thankful to the CRC for Polymers and Central Analytical Research Facility (CARF), Institute of Future Environments, Queensland University of Technology (QUT) for providing equipment support. We are thankful to Henry Spart for his help in XRD analysis characterization and for the helpful discussion and suggestions. P. S. is thankful to the QUT for the financial support from QUT core funding (QUT/ 322120-0301/07). P. S. also acknowledges the Australian Research Council (ARC) for the Future Fellowship (FT130101337).
Publisher Copyright:
© 2019 The Royal Society of Chemistry.
PY - 2019/7/21
Y1 - 2019/7/21
N2 - Diketopyrrolopyrrole (DPP) is one of the most fascinating organic dyes, and has gained significant attention in the organic electronic community in recent times. Due to their outstanding semiconducting properties, DPP-based small molecules and polymers can be used as active semiconductor thin films for various high performance electronic devices. However, although several flanking groups attached to the DPP backbone have been reported in the literature for DPP molecules, there is little study about the effect of fused rings flanked on both sides of the DPP core. Recently our group reported for the first time a naphthalene-flanked DPP as a new DPP family member. In this work, we have performed electropolymerization studies on a newly synthesized naphthalene flanked DPP core with two alkyl chains, hexyl (H-DPPN) and octyl (O-DPPN), as conjugated monomers. Electrochemical studies have been carried out on glassy carbon (GC) and indium tin oxide (ITO) electrodes by using repetitive cyclic voltammetry (CV) as the deposition technique for up to 50 cycles. The concentration of H-DPPN and O-DPPN solution in dichloromethane was found to be a key parameter when optimizing conditions for obtaining an electropolymerised thin film, although other parameters such as the electrolyte, potential range, number of cycles, and the nature of the electrode all play a role in successful thin film formation. The electropolymerized thin films were characterised using UV-Vis spectroscopy, atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photon spectroscopy (XPS) and surface profilometry. We found that each monomer produced different film morphologies on glassy carbon and ITO electrodes. We believe that electropolymerized poly(H-DPPN) and poly(O-DPPN) thin film electrodes could be used for various applications such as studying redox reactions and bio-sensing.
AB - Diketopyrrolopyrrole (DPP) is one of the most fascinating organic dyes, and has gained significant attention in the organic electronic community in recent times. Due to their outstanding semiconducting properties, DPP-based small molecules and polymers can be used as active semiconductor thin films for various high performance electronic devices. However, although several flanking groups attached to the DPP backbone have been reported in the literature for DPP molecules, there is little study about the effect of fused rings flanked on both sides of the DPP core. Recently our group reported for the first time a naphthalene-flanked DPP as a new DPP family member. In this work, we have performed electropolymerization studies on a newly synthesized naphthalene flanked DPP core with two alkyl chains, hexyl (H-DPPN) and octyl (O-DPPN), as conjugated monomers. Electrochemical studies have been carried out on glassy carbon (GC) and indium tin oxide (ITO) electrodes by using repetitive cyclic voltammetry (CV) as the deposition technique for up to 50 cycles. The concentration of H-DPPN and O-DPPN solution in dichloromethane was found to be a key parameter when optimizing conditions for obtaining an electropolymerised thin film, although other parameters such as the electrolyte, potential range, number of cycles, and the nature of the electrode all play a role in successful thin film formation. The electropolymerized thin films were characterised using UV-Vis spectroscopy, atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photon spectroscopy (XPS) and surface profilometry. We found that each monomer produced different film morphologies on glassy carbon and ITO electrodes. We believe that electropolymerized poly(H-DPPN) and poly(O-DPPN) thin film electrodes could be used for various applications such as studying redox reactions and bio-sensing.
UR - http://www.scopus.com/inward/record.url?scp=85068656002&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85068656002&partnerID=8YFLogxK
U2 - 10.1039/c9py00430k
DO - 10.1039/c9py00430k
M3 - Article
AN - SCOPUS:85068656002
SN - 1759-9962
VL - 10
SP - 3722
EP - 3739
JO - Polymer Chemistry
JF - Polymer Chemistry
IS - 27
ER -